Injector Experts Service Procedure

  • Injectors are externally cleaned, visually inspected
  • Injectors are tested for resistance, inductance, shorts, and current draw
  • Leak, spray pattern, and flow rate tests are performed and recorded
  • A three step ultrasonic cleaning process in three separate ultrasonic tanks
  • A high pressure back-flush is performed to remove any remaining particles
  • Leak, spray pattern, and flow rate tests are re-performed and recorded
  • New filter baskets, o-rings, and pintle caps are installed if applicable
  • The injectors are placed in sealed plastic bags
  • A comprehensive test report is prepared and returned with the injectors
  • Your injectors are shipped back to you at no additional cost